Walls-
____Double check dimensions of all walls (at the top of the wall)
____Check that all the corners are plumb
____Check that the middle braces of each wall are set back just a bit (about 1/2" in the middle)
____Check that the top of the walls are level
____Patch any holes or cracks
____Reinforce all joints that need reinforcing
____Make sure all turn buckles have room to move on the screw
____Put up string lines from corner to corner on every all with spacer blocks
Windows
____Double check that all windows are the proper size and in the proper location
____Make sure all windows are square and secured so they won't move
____Brace all openings 2' on Center
____ Make sure you have 4" holes in the bottom of each opening for pumping
____scab weak points as needed around openings
Accesses
____Hvac openings
-6" fresh air (possibly 2)
-4" dryer
-2" for AC line
-Oven Vent
____Plumbing
-Hose bibs
-Sprinkler Lines
-Garage Sink
-water inlet
-Sewer drain
-Geo thermal loops (two 2" per loop)
-Whole house Vacuum system
____Electrical
-Exterior Outlets
-Exterior lights
-Exterior Switches
-Garage Switches
-Breaker Box
-Main meter
-Specialty outlets
____Miscleneous
-Extra Vents
-Air exchanger
____Beam Pockets
____Floor Hangers or bolts
___
